CS312 Recitation 16
Review of Asymptotic Complexity


  • Asymptotic Analysis
  • Worst-Case and Average-Case Analysis
  • Order of Growth and Big-O Notation
  • Comparing Orders of Growth
  • Binary Search Trees
  • Exercises

  • Asymptotic Analysis

    When analyzing the running time or space usage of programs, we usually try to estimate the time or space as function of the input size. For example, when analyzing the worst case running time of a function that sorts a list of numbers, we will be concerned with how long it takes as a function of the length of the input list.  For example, we say the standard insertion sort takes time T(n) where T(n)= c*n2+k for some constants c and k.  In contrast, merge sort takes time T ′(n) = c*n*log2(n) + k.

    The asymptotic behavior of a function f(n) (such as f(n)=c*n or f(n)=c*n2, etc.) refers to the growth of f(n) as n gets large. We typically ignore small values of n, since we are usually interested in estimating how slow the program will be on large inputs. A good rule of thumb is: the slower the asymptotic growth rate, the better the algorithm (although this is often not the whole story).

    By this measure, a linear algorithm (i.e., f(n)=d*n+k) is always asymptotically better than a quadratic one (e.g., f(n)=c*n2+q). That is because for any given (positive) c,k,d, and q there is always some n at which the magnitude of c*n2+q overtakes d*n+k. For moderate values of n, the quadratic algorithm could very well take less time than the linear one, for example if c is significantly smaller than d and/or k is significantly smaller than q. However, the linear algorithm will always be better for sufficiently large inputs. Remember to THINK BIG when working with asymptotic rates of growth.

    Worst-Case and Average-Case Analysis

    When we say that an algorithm runs in time T(n), we mean that T(n) is an upper bound on the running time that holds for all inputs of size n. This is called worst-case analysis. The algorithm may very well take less time on some inputs of size n, but it doesn't matter. If an algorithm takes T(n)=c*n2+k steps on only a single input of each size n and only n steps on the rest, we still say that it is a quadratic algorithm.

    A popular alternative to worst-case analysis is average-case analysis. Here we do not bound the worst case running time, but try to calculate the expected time spent on a randomly chosen input. This kind of analysis is generally harder, since it involves probabilistic arguments and often requires assumptions about the distribution of inputs that may be difficult to justify. On the other hand, it can be more useful because sometimes the worst-case behavior of an algorithm is misleadingly bad. A good example of this is the popular quicksort algorithm, whose worst-case running time on an input sequence of length n is proportional to n2 but whose expected running time is proportional to n log n.

    Order of Growth and Big-O Notation

    In estimating the running time of insert_sort (or any other program) we don't know what the constants c or k are. We know that it is a constant of moderate size, but other than that it is not important; we have enough evidence from the asymptotic analysis to know that a merge_sort (see below) is faster than the quadratic insert_sort, even though the constants may differ somewhat. (This does not always hold; the constants can sometimes make a difference, but in general it is a very good rule of thumb.)

    We may not even be able to measure the constant c directly. For example, we may know that a given expression of the language, such as if, takes a constant number of machine instructions, but we may not know exactly how many. Moreover, the same sequence of instructions executed on a Pentium IV will take less time than on a Pentium II (although the difference will be roughly a constant factor). So these estimates are usually only accurate up to a constant factor anyway. For these reasons, we usually ignore constant factors in comparing asymptotic running times.

    Computer scientists have developed a convenient notation for hiding the constant factor. We write O(n) (read: ''order n'') instead of ''cn for some constant c.'' Thus an algorithm is said to be O(n) or linear time if there is a fixed constant c such that for all sufficiently large n, the algorithm takes time at most cn on inputs of size n. An algorithm is said to be O(n2) or quadratic time if there is a fixed constant c such that for all sufficiently large n, the algorithm takes time at most cn2 on inputs of size n. O(1) means constant time.

    Polynomial time means nO(1), or nc for some constant c. Thus any constant, linear, quadratic, or cubic (O(n3)) time algorithm is a polynomial-time algorithm.

    This is called big-O notation. It concisely captures the important differences in the asymptotic growth rates of functions.

    One important advantage of big-O notation is that it makes algorithms much easier to analyze, since we can conveniently ignore low-order terms. For example, an algorithm that runs in time

    10n3 + 24n2 + 3n log n + 144

    is still a cubic algorithm, since

    10n3 + 24n2 + 3n log n + 144
    <= 10n3 + 24n3 + 3n3 + 144n3
    <= (10 + 24 + 3 + 144)n3
    = O(n3)
    .

    Of course, since we are ignoring constant factors, any two linear algorithms will be considered equally good by this measure. There may even be some situations in which the constant is so huge in a linear algorithm that even an exponential algorithm with a small constant may be preferable in practice. This is a valid criticism of asymptotic analysis and big-O notation. However, as a rule of thumb it has served us well. Just be aware that it is only a rule of thumb--the asymptotically optimal algorithm is not necessarily the best one.

    Some common orders of growth seen often in complexity analysis are

    O(1) constant
    O(log n) logarithmic
    O(n) linear
    O(n log n) "n log n"
    O(n2) quadratic
    O(n3) cubic

     

    Here log means log2 or the logarithm base 2, although the logarithm base doesn't really matter since logarithms with different bases differ by a constant factor. Note also that 2O(n) and O(2n) are not the same!

    Comparing Orders of Growth

    O
    Let f and g be functions from positive integers to positive integers. We say f is O(g(n)) (read: ''f is order g'') if g is an upper bound on f:  there exists a fixed constant c and a fixed n0 such that for all n≥n0,

    f(n) ≤ cg(n).

    Equivalently, f is O(g(n)) if the function f(n)/g(n) is bounded above by some constant.

    o
    We say f is o(g(n)) (read: "f is little-o of g'') if for all arbitrarily small real c > 0, for all but perhaps finitely many n,

    f(n) ≤ cg(n).

    Equivalently, f is o(g) if the function f(n)/g(n) tends to 0 as n tends to infinity. That is, f is small compared to g. If f is o(g) then f is also O(g)

    Ω
    We say that f is Ω(g(n)) (read: "f is omega of g") if g is a lower bound on f for large n. Formally, f is Ω(g) if there is a fixed constant c and a fixed n0 such that for all n>n0,

    cg(n) f(n)

    For example, any polynomial whose highest exponent is nk is Ω(nk). If f(n) is Ω(g(n)) then g(n) is O(f(n)). If f(n) is o(g(n)) then f(n) is not Ω(g(n)).

    Θ
    We say that f is Θ(g(n)) (read: "f is theta of g") if g is an accurate characterization of f for large n: it can be scaled so it is both an upper and a lower bound of f. That is, f is both O(g(n)) and Ω(g(n)). Expanding out the definitions of  Ω and O, f is Θ(g(n)) if there are fixed constants c1 and c2 and a fixed n0 such that for all n>n0,

    c1g(n) f(n) c2 g(n)

    For example, any polynomial whose highest exponent is nk is  Θ(nk). If f is Θ(g), then it is O(g) but not o(g). Sometimes people use O(g(n)) a bit informally to mean the stronger property Θ(g(n)); however, the two are different.

    Here are some examples:

    The meaning of an expression like O(n2) is really a set of functions: all the functions that are O(n2). When we say that f(n) is O(n2), we mean that f(n) is a member of this set. It is also common to write this as f(n) = O(g(n)) although it is not really an equality.

    We now introduce some convenient rules for manipulating expressions involving order notation. These rules, which we state without proof, are useful for working with orders of growth. They are really statements about sets of functions. For example, we can read #2 as saying that the product of any two functions in O(f(n)) and O(g(n)) is in O(f(n)g(n)).

    1. cnm = O(nk) for any constant c and any m ≤ k.
    2. O(f(n)) + O(g(n)) = O(f(n) + g(n)).
    3. O(f(n))O(g(n)) = O(f(n)g(n)).
    4. O(cf(n)) = O(f(n)) for any constant c.
    5. c is O(1) for any constant c.
    6. logbn = O(log n) for any base b.

    All of these rules (except #1) also hold for Q as well.

    Binary search trees

    A binary search tree is one in which every node n satisfies the binary search tree invariant: its left child and all the nodes below it have values (or keys) less than that of n. Similarly, the right child node and all nodes below it have values greater than that of n.

    The code for a binary search tree looks like the following. First, to check for an element or to add a new element, we simply walk down the tree.

    (* contains(t,x) is whether x is in the tree *)
    let contains(t: tree, x: value): bool =
      match t with
        Empty -> false
      | Node{value=value; left=left; right=right} ->
          (match compare(x, value) with
             EQUAL -> true
           | LESS -> contains(left, x)
           | GREATER -> contains(right, x))
    
    (* add(t,x) is a BST with the same values as t, plus x *)
    let add(t: tree, x: value): tree =
     let balance(t: tree): tree = t (* what to write here? *)
     in
      match t with
        Empty -> Node{value=x; left=Empty; right=Empty}
      | Node {value=value; left=left; right=right} ->
        (match compare(x, value) with
          EQUAL -> Node{value=x; left=left; right=right}
        | LESS -> Node{value=value; left=add(left, x); right=right}
        | GREATER -> Node{value=value; left=left; right=add(right,x) } )
    

    When a tree satisfies the BST invariant, an in-order traversal of the tree nodes will visit the nodes in ascending order of their contained values. So it's easy to fold over all tree nodes in order.

    Removing elements is a little trickier. If a node is a leaf, it can be removed. If it has one child, it can be replaced with its child. If it has two children, it can be replaced with either its immediate successor (or predecessor), which requires searching in the tree.

    (* Returns: a tree just like t except that the node containing x is removed.
     * Checks: x is in the tree. *)
    let remove(t: tree, x: value): tree =
        (* Returns: a tree in which the successor of the root is removed,
         * along with the value of that successor.
         * Checks: the root has a successor. *)
      let removeSuccessor(t: tree): tree*value =
          match t with
               Empty -> raise Fail "impossible"
             | Node {value=value; left=Empty; right=right} -> (right, value)
             | Node {value=value; left=left; right=right} -> 
                   let (l, v) = removeSuccessor(left)
                    in (Node{value=value; left=l; right=right}, v)
      in
        match t with
             Empty -> raise Fail "value not in the tree"
           | Node {value=value; left=left; right=right) ->
               match Int.compare(x, value) with
                  LESS -> Node{value=value; left=remove(left, x); right=right)
                | GREATER -> Node{value=value; left=left; right=remove(right, x)}
                | EQUAL -> match (left, right) with
                                  (_, Empty) -> left
                                | (Empty, _) -> right
                                | _ -> let (r, v) = removeSuccessor(right) in
    	                           Node {value=v; left=left; right=r}
    

    The time required to find a node in a BST, or to remove a node from a BST, is O(h), where h is the height of the tree: the length of the longest path from the root node to any leaf. If a tree is perfectly balanced, so that all leaf nodes are at the same depth, then h is O(log n). This makes binary search trees an attractive data structure, especially for implementing ordered sets and maps.

    The problem with BST's is that they are not necessarily balanced. In fact, if nodes are added to a BST in increasing order, the resulting BST will be essentially a linked list. The solution to this problem is to make sure that the BST is balanced. Making the BST perfectly balanced at every step is too expensive, but if we are interested in asymptotic complexity, we merely need the height h to be proportional to O(log n). We will say that the BST is balanced in this case.

    There are many ways to keep binary search trees balanced. Some of the more popular methods are red-black trees, AVL trees, B-trees, and splay trees. But there are many more, including 2-3 trees, 2-3-4 trees, AA trees, and treaps. Each kind of binary search tree works by strengthening the representation invariant so that the tree must be approximately balanced.


    Exercises

    1. Write an implementation of stacks using lists.  What is the big-O running time of each operation?  The signature for stacks is:

    module type STACK =
      sig
        type 'a stack
        val empty : unit -> 'a stack
        val push : ('a * 'a stack) -> 'a stack
        val top : 'a stack -> 'a option
        val pop : 'a stack -> ('a stack) option
      end
    

    2. Write an implementation of queues using lists.  What is the big-O running time of each operation?  The signature for queues is:

    module type QUEUE =
      sig
        type 'a queue
        val empty : unit -> 'a queue
        val insert : ('a * 'a queue) -> 'a queue
        val first : 'a queue -> 'a option
        val rest : 'a queue -> 'a option
      end
    

    3.  Write some of the functions that occur in the List structure by hand (e.g., rev, @, map, foldl, etc.) and analyze them to determine their big-O running time.